Publication:
Effects of laser treatment modes on the parameters of the hardening zones and the wear resistance of steel 40Cr

Дата
2020
Авторы
Biryukov, V. P.
Petrovsky, V. N.
Panov, D. V.
Ushakov, D. V.
Journal Title
Journal ISSN
Volume Title
Издатель
Научные группы
Организационные подразделения
OrgUnit Logo
Организационная единица
Институт лазерных и плазменных технологий
Стратегическая цель Института ЛаПлаз – стать ведущей научной школой и ядром развития инноваций по лазерным, плазменным, радиационным и ускорительным технологиям, с уникальными образовательными программами, востребованными на российском и мировом рынке образовательных услуг.
Выпуск журнала
Аннотация
© Published under licence by IOP Publishing Ltd.The paper presents the results of metallographic and tribological studies of laser hardening zones of steel samples. A full factorial experiment on laser hardening with a change in the distance from the focal plane, radiation power and processing speed was carried out. The regularities of changes in the depth and width of the quenching zones are obtained from the regression equations. With low-frequency transverse scanning of the laser beam up to 100 Hz, the hardening zones with a width of 20 mm and a depth of 1.4-2.0 mm in one pass were obtained. The wear resistance of the hardened zones is 3.68 times higher than the base material.
Описание
Ключевые слова
Цитирование
Effects of laser treatment modes on the parameters of the hardening zones and the wear resistance of steel 40Cr / Biryukov, V.P. [et al.] // IOP Conference Series: Materials Science and Engineering. - 2020. - 759. - № 1. - 10.1088/1757-899X/759/1/012004
URI
https://www.doi.org/10.1088/1757-899X/759/1/012004
 https://www.scopus.com/record/display.uri?eid=2-s2.0-85079630386&origin=resultslist
 https://openrepository.mephi.ru/handle/123456789/20314
Коллекции
Публикации