Персона:
Барышев, Геннадий Константинович

Организационные подразделения

Организационная единица

Другие подразделения НИЯУ МИФИ

Структурные подразделения НИЯУ МИФИ, не включенные в состав институтов и факультетов.

Фамилия

Барышев

Имя

Геннадий Константинович

Полная страница элемента

Результаты поиска

Теперь показываю 1 - 10 из 15

Только метаданные
Precision Spectrometric Search Dosimeter-Radiometer Based on a Matrix SiPM, Designed to Restore the Geometry of Ionizing Radiation Sources
(2021) Kondrateva, A.; Florentsev, V.; Baryshev, G.; Berestov, A.; Biryukov, A.; Барышев, Геннадий Константинович; Берестов, Александр Васильевич; Бирюков, Александр Павлович
© 2021, Springer Nature Switzerland AG.The improvement of spectrometric devices and methods makes it possible to create a fundamentally new device that can distinguish not only the energy characteristics and activity of ionizing radiation sources. Today, devices are also expected to be able to quickly determine the geometry of the source, and not only from a set of standard ones. The method discussed in the article describes how the use of SiPM matrices allows detecting angular characteristics of the direction of gamma radiation incidence on the detector, allowing you to determine the position and types of sources. The detector created by this method has high sensitivity and resolution. These properties make it possible to use it in nuclear medicine to study the distribution of isotopes in the human body, in crystallography, archaeology, radiation safety systems, etc.
Только метаданные
Perspectives of application of nanostructured composites for new diagnostic systems for transcranial magnetic stimulation
(2019) Kondrateva, A.; Baryshev, G.; Bozhko, Y.; Konashenkova, N.; Барышев, Геннадий Константинович; Божко, Юрий Валентинович
© Published under licence by IOP Publishing Ltd.The paper presents a study of the prospects for using nanostructured composites for new promising diagnostic systems of transcranial magnetic stimulation. A principle of operation of a new device of transcranial magnetic stimulation using nanostructured composites is proposed. The system wires Cu-Nb are considered as an example of nanostructured composites. The analysis was carried out from the point of view of electrophysical, thermophysical and strength properties. According to the study, conclusions were made about the prospects for using materials of this class as a functional material for a stimulating probe of a portable device of transcranial magnetic stimulation.
Только метаданные
Information measuring system for research of anisotropy of conductive materials
(2019) Baryshev, G.; Tokarev, A.; Berestov, A.; Барышев, Геннадий Константинович; Токарев, Антон Николаевич; Берестов, Александр Васильевич
The paper devotes a new information measuring system and results of its design for studying the anisotropy of conducting materials of various functional purposes, designed at the Department of Engineering Science and Technology of National Research Nuclear University MEPhI. The system allows to obtain the high rate of anisotropy assessment, ensuring the possibility of anisotropy assessment of the properties of materials by the volume of the sample or product under investigation during their manufacture or operation. (C) 2019 Elsevier Ltd. All rights reserved.
Только метаданные
General method of research of electrophysical properties of nanostructured composites
(2019) Sergeevna, K. A.; Konstantinovich, B.; Berestov, A. V.; Nikolaevich, T. A.; Olegovna, C. P.; Барышев, Геннадий Константинович; Берестов, Александр Васильевич; Токарев, Антон Николаевич; Черных, Полина Олеговна
© 2019 Trans Tech Publications Ltd, Switzerland.The paper presents an information model and a general methodology for studying the electrophysical properties of materials and products from nanostructured composites. The information model of the original methodology for the standard process of experimental measurement and study of the electrophysical properties of composites comprehensively takes into account the characteristics associated with their industrial production (quality assurance systems, safety, certification, etc.) in order to develop experimental measurement methods and new standards, including standards of enterprises, methodological guidelines, work programs for the development of high-tech production advanced materials and products.
Только метаданные
Sample printing device for additive manufacturing of electronic housings
(2021) Sinev, A. Yu.; Panasenko, R. A.; Shamkova, V. S.; Baryshev, G.; Berestov, A. V.; Шамкова, Влада Сергеевна; Барышев, Геннадий Константинович; Берестов, Александр Васильевич
© 2021 Trans Tech Publications Ltd, Switzerland.This work presents the results of work on a 3D printing device with a non-standard arrangement of the table and nozzle, which is necessary for the additive production of plastic cases for electronic devices. The non-standard arrangement of the table is caused by the need to use special accessories to hold third-party embedded elements of the case. A metal part-a contactor-is used as an embedded element. Due to the specific mortgage they made, as well as the experimental equipment, the authors came to the conclusion that it is economically more expedient to design and manufacture a prototype 3D printer than to modify the existing device. A sample of the FDM printing device was designed, manufactured and tested.
Только метаданные
Application of Information Measuring Systems for Development of Engineering Skills for Cyber-Physical Education
(2021) Baryshev, G.; Klimov, V.; Berestov, A.; Tokarev, A.; Petrenko, V.; Барышев, Геннадий Константинович; Климов, Валентин Вячеславович; Берестов, Александр Васильевич; Токарев, Антон Николаевич; Петренко, Валерия Валерьевна
© 2021, The Author(s), under exclusive license to Springer Nature Switzerland AG.The new industrial revolution opening the way to the digital world requires further development of engineering education. Future engineers should obtain skills in the area of development of cyber physical (intellectual) systems. In National Research Nuclear University MEPhI we have examples of implementation of new engineering courses and programs for cyber physical education. In this paper we discuss the problems and results of application of information measuring systems which main purpose is for research and development needs, for educational tasks.
Только метаданные
Establishing an Information Model for the "philologist Automated Workplace" Concept for Launching and Implementing Cross-Disciplinary Research Projects at the Interface of Socio-Humanitarian and Technical Science
(2022) Baryshev, G. K.; Klimov, V. V.; Konashenkova, N. A.; Maksimkin, A. I.; Барышев, Геннадий Константинович; Климов, Валентин Вячеславович; Максимкин, Александр Игоревич
A series of processes leading to dramatic changes in all aspects of our lives are ushering in the fourth industrial revolution, the foundation of which is the development of fast-growing digital technologies. Among these are big data, blockchain, artificial intelligence and neural networks, and the Internet of Things (IoT). In order to have an understanding of digital processes and their social effect, it is necessary to describe social systems and social sectors of the economy in new terms and through a new understanding of the impact of the technologies of the fourth industrial revolution. One element of such a description is the problem of developing and transforming an academic ecosystem to launch and implement interdisciplinary projects at the intersection of the social and technical sciences. That is why we have developed the concept of the Philologist Automated Workplace as an element of the academic ecosystem for launching and implementing interdisciplinary research projects at the intersection of social and technical sciences.
Только метаданные
Methodological and Informational Support for Designing the "philologist Automated Workplace" as an Element of Academic Ecosystem for Launching and Implementing Cross-Disciplinary Research Projects at the Interface of Social and Technical Sciences
(2022) Baryshev, G. K.; Klimov, V. V.; Bozhko, Y. V.; Panasenko, R. A.; Biryukov, A. P.; Konashenkova, N. A.; Барышев, Геннадий Константинович; Климов, Валентин Вячеславович; Божко, Юрий Валентинович; Бирюков, Александр Павлович
Только метаданные
General experimental method of research of anisotropy of conductive materials
(2019) Barzov, A. A.; Kondrateva, A. S.; Baryshev, G. K.; Biryukov, A. P.; Tutnov, I. A.; Барышев, Геннадий Константинович; Бирюков, Александр Павлович; Тутнов, Игорь Александрович
© 2019 Trans Tech Publications Ltd, Switzerland.The paper devotes a new general experimental method for studying the anisotropy of conducting materials of various functional purposes. The difference between the presented method and the previously known one is in the high rate of anisotropy assessment, ensuring the possibility of anisotropy assessment of the properties of materials by the volume of the sample or product under investigation during their manufacture or operation. The procedure for measuring the anisotropy of electrophysical properties and the results of the study of some samples are presented.
Только метаданные
Principles of Design of a Learning Management System for Development of Economic Skills for Nuclear Engineering Education
(2021) Baryshev, G.; Putilov, A.; Smirnov, D.; Tsyganov, A.; Chervyakov, V.; Барышев, Геннадий Константинович; Путилов, Александр Валентинович; Смирнов, Дмитрий Сергеевич; Цыганов, Александр Алексеевич; Червяков, Владимир Николаевич; Факультет бизнес-информатики и управления комплексными системами
© 2021, The Author(s), under exclusive license to Springer Nature Switzerland AG.The dramatic changes in education that we face in 2020 and which are the result of the accelerating digital revolution indicate the need to develop new tools for education and training. Leading universities are developing their own Learning Management Systems (LMS) based on information and Internet technologies. However, in higher education there are certain educational tasks in the interdisciplinary field. One of them is the task of successfully developing atomic engineering education. In this article, we present the basic design principles and architecture features of a specific LMS for the development of economic skills for education in the field of nuclear technology.