Персона: Гаспарян, Юрий Микаэлович
Загружается...
Email Address
Birth Date
Организационные подразделения
Организационная единица
Институт лазерных и плазменных технологий
Стратегическая цель Института ЛаПлаз – стать ведущей научной школой и ядром развития инноваций по лазерным, плазменным, радиационным и ускорительным технологиям, с уникальными образовательными программами, востребованными на российском и мировом рынке образовательных услуг.
Статус
Руководитель научной группы "Плазменные и лазерные технологии новых материалов для ядерной и термоядерной энергетики"
Руководитель научной группы -Международный центр ядерных компетенций (МЦЯДКОМ)
Руководитель научной группы -Международный центр ядерных компетенций (МЦЯДКОМ)
Фамилия
Гаспарян
Имя
Юрий Микаэлович
Имя
9 results
Результаты поиска
Теперь показываю 1 - 9 из 9
- ПубликацияТолько метаданныеThe Project of MEPhIST Tokamak(2019) Kurnaev, V. A.; Vorobyov, G. M.; Nikolaeva, V. E.; Krat, S. A.; Melnikov, A. V.; Ivanov, D. P.; Gasparyan, Y. M.; Крат, Степан Андреевич; Мельников, Александр Владимирович; Гаспарян, Юрий Микаэлович© 2019, Pleiades Publishing, Ltd.The concept of the small spherical tokamak project is described, the main objectives of the project are to increase competencies at the University in the training of personnel in the field of physics and technologies of controlled thermonuclear fusion, as well as attracting young people to this area. The implementation of the project also implies giving impetus and new opportunities for improving the methods of plasma diagnostics developed at the University, studies on the plasma surface interactions and computer simulation of processes in the plasma and on the plasma facing surfaces. The installation has a large radius of 25 cm, an aspect ratio of less than 2, and a vertical elongation of ∼ 3, which allows, in principle, for small sizes and costs of the installation, taking into account the subsequent increase in the toroidal field to ∼ 2 T, to carry out important studies for progress in plasma performance in tokamaks. Namely, research on physics of plasma confinement, current drive with RF power and plasma interaction with materials. The project includes a phased implementation with a multiple increase in the magnetic field and plasma current, as well as the possibility of quick and convenient access to the internal elements of the discharge chamber and the simultaneous use of a large number of diagnostics.
- ПубликацияОткрытый доступSURFACE HYDROGEN ISOTOPES DETECTION BY LOW ANGLE ION SCATTERING SPECTROSCOPY(НИЯУ МИФИ, 2023) Sinelnikov, D. N.; Gasparyan, Y. M.; Grishaev, M. V.; Efimov, N. E.; Krat, S. A.; Nikitin, I. A.; Крат, Степан Андреевич; Гаспарян, Юрий Микаэлович; Синельников, Дмитрий Николаевич; Никитин, Иван Андреевич; Ефимов, Никита Евгеньевич; Гришаев, Максим ВалерьевичHydrogen isotopes retention in thermonuclear fusion reactors is limited due to safety regulations and should be well controlled. Surface conditions can strongly affect accumulation rates of hydrogen isotopes in the bulk of plasma facing materials. Therefore, in vacuo methods of surface composition control may help to investigate mechanisms of this effects.
- ПубликацияТолько метаданныеDeuterium and helium retention in W with and without He-induced W ‘fuzz’ exposed to pulsed high-temperature deuterium plasma(2019) Tokitani, M.; Ogorodnikova, O. V.; Klimov, K. S.; Poskakalov, A. G.; Kaziev, A. V.; Kharkov, M. M.; Efimov, V. S.; Gasparyan, Y. M.; Volkov, N. V.; Alimov, V. K.; Огородникова, Ольга Вячеславовна; Климов, Николай Сергеевич; Казиев, Андрей Викторович; Харьков, Максим Михайлович; Ефимов, Виталий Сергеевич; Гаспарян, Юрий Микаэлович© 2018 Elsevier B.V. In the present work, helium (He) was incorporated into tungsten (W) samples by inductively coupled plasma (ICP) source above the threshold of He-induced W ‘fuzz’ formation on W surface. Then, W samples with and without nano-structured W ‘fuzz’ were exposed to pulsed heat loads using deuterium (D) plasma in quasi-stationary high-current plasma gun QSPA-T. The pulse duration was 1 ms and number of pulses was varied from one to thirty to simulate ITER transient events with surface heat load parameters relevant to edge-localized-mode (ELM) impacts. The irradiation was performed below and above the W melting threshold. The D and He retention in each irradiated sample was measured by a method of thermal desorption spectroscopy. We examined the impact of (i) ELMs-like events and (ii) formation of He-induced nano-structured ‘fuzz’ on the D retention in W. We found that the D retention was the highest for samples irradiated by plasma gun above the melting threshold after thirty pulses. Moreover, the D retention after 10 pulses of deuterium plasma gun exposure was higher than that after stationary low-energy plasma exposure at sample temperature of either 600 or 700 K indicating the dominate influence of ELM's-like events on the D retention compared to normal operation regime. The D retention in W samples with the presence of He-induced W ‘fuzz’ was slightly smaller than without that after one pulse of plasma gun exposure with heat load below the W melting temperature. The W ‘fuzz’ was not disappear in this loading conditions, only the length and thickness of nano-structured W fibres were reduced by factors of ∼4 and ∼2, respectively. The He concentration in W with W ‘fuzz’ was decreased by a factor of about 3 after one pulse of plasma gun exposure. The results obtained give possibility to assess the particle retention in divertor areas subjected to high thermal loads at different operation regimes.
- ПубликацияОткрытый доступTIME-OF-FLIGHT ANALYSIS OF IONS FROM LASER-INDUCED PLASMA(НИЯУ МИФИ, 2023) Grishaev, M. V.; Efimov, N. E.; Sinelnikov, D. N.; Nikitin, I. A.; Gasparyan, Y. M.; Vovchenko, E. D.; Вовченко, Евгений Дмитриевич; Синельников, Дмитрий Николаевич; Ефимов, Никита Евгеньевич; Гришаев, Максим Валерьевич; Гаспарян, Юрий Микаэлович; Никитин, Иван АндреевичOne of the most detrimental phenomena in fusion research is the interaction of plasma with a surface of a first wall and in-chamber elements. It causes erosion of the plasma-facing components (PFC), which in turn results in a degradation of plasma parameters due to transport of erosion products into the hot plasma. On the other hand, these processes cause re-deposition of the eroded material together with fuel components (deuterium and tritium). This is the dominant mechanism for fuel retention in PFC.
- ПубликацияОткрытый доступAPPLICATION OF LIBS, LA-QMS, LA-TOF-MS FOR FUSION RELEVANT MATERIALS ANALYSIS(НИЯУ МИФИ, 2021) Efimov, N. E.; Sinelnikov, D. N.; Bulgadaryan, D. G.; Gasparyan, Y. M.; Vovchenko, E. D.; Marenkov, E. D.; Маренков, Евгений Дмитриевич; Ефимов, Никита Евгеньевич; Вовченко, Евгений Дмитриевич; Синельников, Дмитрий Николаевич; Гаспарян, Юрий МикаэловичOne of the critical issues on the way to controlled nuclear fusion is related to plasma wall interaction. Such interaction leads to co-deposition of hydrogen isotopes together with eroded first wall materials. It is known that the deuterium-tritium (DT) mixture will be used in ITER and future fusion devices as a fuel. So as the accumulation of radioactive tritium in the machines is limited by the nuclear license, there is a need for some remote fuel retention monitoring system. In current devices, the total fuel amount is determined from the gas balance (difference between input and output flows) measurements and from a post mortem analysis of plasmafacing components. One of the most promising techniques which can be applied in situ in tokamaks is based on laser irradiation of the surface of interest followed by mass- or optical spectroscopy. Such a technique was already applied in TEXTOR tokamak to the hydrogenic carbon layers [1], and it is included in the task list of ITER with a high priority.
- ПубликацияОткрытый доступQUANTITATIVE ANALYSIS OF THE TEMPERATURE DRIVEN CHROMIUM SEGREGATION IN W-Cr-Y ALLOY BY LOW ENERGY ION SCATTERING SPECTROSCOPY(НИЯУ МИФИ, 2023) Efimov, N. E.; Sinelnikov, D. N.; Wang, Y.; Harutyunyan, Z. R.; Gasparyan, Y. M.; Grishaev, M. V.; Nikitin, I. A.; Tan, X.; Синельников, Дмитрий Николаевич; Ефимов, Никита Евгеньевич; Арутюнян, Зорий Робертович; Никитин, Иван Андреевич; Гаспарян, Юрий Микаэлович; Гришаев, Максим ВалерьевичOne of the challenging problems which arise in the controlled nuclear fusion is related to the design and material choice of plasma facing components for the future reactors. Tungsten is considered to be one of the most suitable candidates due to its high melting point, thermal conductivity and relatively low erosion rate, and, therefore, it is planned to be used in nextgen facilities like ITER and DEMO. However, under high neutron fluxes its stable isotopes may form radioactive ones. Being not so hazardous while it is inside the reactor, in case of a loss of coolant accident (LOCA) a volatile oxide of W and of its transmutation products may appear, which is undesirable. A possible solution to avoid the release of the radioactive oxides is the use of self-passivating W-Cr-Y alloys [1], which under LOCA scenarios forms on the surface a chromium oxide, preventing the formation of tungsten oxide. Such alloys are of the great interest now, especially when it comes to analyzing the dynamics of the chromium release to the outermost layers [2,3]. In this work, capabilities of low energy ion scattering spectroscopy (LEIS) with small angle scattering to the characterization the surface morphology of W-11,4Cr-0,6Y after pre-annealing at different temperatures are revealed.
- ПубликацияТолько метаданныеSurface Structure Modification and Deuterium Retention in Tungsten under Pulsed Plasma Loads(2019) Poskakalov, A. G.; Klimov, N. S.; Gasparyan, Y. M.; Ogorodnikova, O. V.; Efimov, V. S.; Климов, Николай Сергеевич; Гаспарян, Юрий Микаэлович; Огородникова, Ольга Вячеславовна; Ефимов, Виталий Сергеевич© 2019, Pleiades Publishing, Ltd.Modification of the surface layer and deuterium accumulation in tungsten targets under plasma irradiation in a quasi-stationary plasma accelerator with an intrinsic magnetic field QSPA-T, which reproduces the conditions (plasma thermal load of 0.2-5 MJ/m2, pulse duration of 0.1-1.2 ms) typical of ELM events in ITER, are studied. Using a scanning electron microscope, structure modifications at the surface and in the bulk after deuterium plasma irradiation are analyzed. The observed changes in the near-surface layer are compared with the calculated data on the change in the internal structure of tungsten under intense thermal action obtained as a result of the numerical solution of the heat conduction problem. The total deuterium retention in the samples was measured using thermal desorption spectroscopy, and it was in the range of (3-4) × 1016 particles/cm2 for the samples melted during plasma exposure. These numbers exceed by an order of magnitude the values obtained for samples without traces of melting.
- ПубликацияТолько метаданныеInfluence of plasma heat loads relevant to ITER transient events on deuterium retention in tungsten(2020) Poskakalov, A. G.; Gasparyan, Y. M.; Efimov, V. S.; Kovalenko, D. V.; Klimov, N. S.; Ogorodnikova, O. V.; Гаспарян, Юрий Микаэлович; Ефимов, Виталий Сергеевич; Климов, Николай Сергеевич; Огородникова, Ольга ВячеславовнаDeuterium (D) retention in Tungsten (W) under plasma heat loads relevant to edge localized modes in ITER was experimentally investigated at the QSPA-T plasma gun facility. Samples were exposed to 1.0 ms D plasma pulses with different heat loads in the range of 0.4-3.7 MJm(-2) (heat flux factor P root t = 13.3-123 MJm(-2)s(-0.5)). A significant D retention was observed already after one pulse. Moreover, the D retention grew up continuously with increasing the power load, although the surface was melted at highest loads (above 1.4 MJ m(-2)). The D retention was higher than that in the case of stationary plasma irradiation at 600-700 K, indicating possible significant contribution of ELM's-like events to the total D retention. All stages of the experiments (irradiation, storage time and TDS) have been simulated using the TMAP 7 code.
- ПубликацияТолько метаданныеA setup for study of co-deposited films(2020) Krat, S. A.; Popkov, A. S.; Gasparyan, Y. M.; Vasina, Y. A.; Prishvitsyn, A. S.; Pisarev, A. A.; Крат, Степан Андреевич; Гаспарян, Юрий Микаэлович; Пришвицын, Александр Сергеевич; Писарев, Александр Александрович© 2020 IOP Publishing Ltd and Sissa Medialab.A setup for investigation of thermal desorption spectra of gases accumulated in thin films deposited by plasma sputtering of solid targets is described. Deposition and thermal desorption spectroscopy (TDS) are performed in two different vacuum chambers separated by a gate valve with the sample transferred between the chambers in-vacuo. The temperature of the substrate for deposited films can be varied in the range of 300-800 K; and the deposition rate is controlled by a quartz microbalance. Thermal desorption of co-deposited gases is analyzed by a quadrupole mass spectrometer. Sputtering rate and evaporation of the film during TDS are measured by quartz microbalances. Three experiments are described 1) trapping of deuterium by the growing chemically active Li film with subsequent decomposition and evaporation of the film, 2) temperature dependent deuterium trapping in the growing W film resulting in trapping with several binding energies, and 3) chemical interaction of D-Li layer with water vapor leading to isotopic H-D exchange and chemical transformation of the deposited film.