Персона: Писарев, Александр Александрович
Загружается...
Email Address
Birth Date
Научные группы
Организационные подразделения
Организационная единица
Институт лазерных и плазменных технологий
Стратегическая цель Института ЛаПлаз – стать ведущей научной школой и ядром развития инноваций по лазерным, плазменным, радиационным и ускорительным технологиям, с уникальными образовательными программами, востребованными на российском и мировом рынке образовательных услуг.
Статус
Фамилия
Писарев
Имя
Александр Александрович
Имя
2 results
Результаты поиска
Теперь показываю 1 - 2 из 2
- ПубликацияТолько метаданныеThe dependence of lithium emissivity from temperature in vacuum ЗАВИСИМОСТЬ СТЕПЕНИ ЧЕРНОТЫ ЛИТИЯ ОТ ТЕМПЕРАТУРЫ В ВАКУУМЕ(2019) Prishvitsyn, A. S.; Krat, S.; Harina, A. P.; Pisarev, A. A.; Пришвицын, Александр Сергеевич; Крат, Степан Андреевич; Писарев, Александр Александрович© 2019 National Research Center Kurchatov Institute. All rights reserved.Correct interpretation of IR video observation data of the surfaces of plasma-facing elements in fusion devices requires detailed knowledge about the emissivity factor of these surfaces in different conditions. In this work, results of emissivity measurements for free metallic lithium surface and a lithium surface supported by the capillary-porous system (CPS) are measured as a function of temperature in the range from 400 to 800 K. Emissivity of solid lithium changed from ~0.04 at 400 K to ~0.09 at 453 K. During melting a sudden drop of emissivity down to ~0.04 was observed. Emissivity increased linearly from 0.04 to ~0.15 with temperature increasing from 455 to 800 K. For fully wetted CPS, emissivity was close to that of free lithium surface for temperature up to ~570 K, while at higher temperature it was lower, probably due to changes in microrelief at high temperatures.
- ПубликацияТолько метаданныеTemperature dependence of hydrogen co-deposition with metals(2019) Gasparyan, Y.; Krat, S.; Davletiyarova, A.; Vasina, Y.; Pisarev, A.; Гаспарян, Юрий Микаэлович; Крат, Степан Андреевич; Писарев, Александр Александрович© 2019 Elsevier B.V. The deuterium retention in aluminum and molybdenum films co-deposited in magnetron discharge has been measured in a wide range of substrate temperatures (from RT to 800 K) by means of thermal desorption spectroscopy. A multi-step temperature dependence was observed, which was compared with the diffusion based model and previous experimental data for tungsten films. The key role of lattice defects in deuterium trapping was demonstrated. The highest D retention among the investigated materials was observed in W films, which have the lowest H solubility, but the highest binding energies of hydrogen with defects. The detrapping energies and concentrations of defects in the films were estimated on the base of the model, and the energies are consistent with the data for bulk materials.